RTL8366SC-CG

LAYER 2 MANAGED 4+2-PORT 10/100/1000M SWITCH CONTROLLER

General Description

The RTL8366SC-CG is a LQFP128, high-performance 4+2-port 10/100/1000M Ethernet switch featuring a low-power integrated 4-port Giga-PHY that supports 1000Base-T, 100Base-TX, and 10Base-T.

For specific applications, the RTL8366SC supports one extra interface that could be configured as RGMII/MII interfaces. The RTL8366SC also supports one Ser-Des interface that could be configured as SGMII/HSGMII interfaces. The RTL8366SC integrates all the functions of a high-speed switch system; including SRAM for packet buffering, non-blocking switch fabric, and internal register management into a single CMOS device.

Features

  • Single-chip 4+2-port 10/100/1000M non-blocking switch architecture
  • Embedded 4-port 10/100/1000Base-T PHY
  • Each port supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode)
  • Extra Interface (Extension GMAC1) Supports High Speed Serial Interface (Extension GMAC1)
    • SGMII (1.25GHz) Interface
    • High SGMII (3.125GHz) Interface
  • Extra Interface (Extension GMAC2) supports
    • Media Independent Interface (MII)
    • Reduced 10/100/1000M Media Independent Interface (RGMII)
  • Full-duplex and half-duplex operation with IEEE 802.3x flow control and backpressure
  • Supports 9216-byte jumbo packet length forwarding at wire speed

Applications

  • 4-Port 1000Base-T Switch
  • 4-Port 1000Base-T Router with one SGMII/HSGMII
  • 4-Port 1000Base-T Router with one SGMII/HSGMII and one MII/RGMII