A2: (1) You may from our website (
http://www.realtek.com.tw/downloads/ ) download the latest driver and click “go”
(2) After download file completely, and then double click file
(3) Double click [setup]
A3:
The link of “WinXP64 and WinXP driver” is only having 「sys」,「inf」, and「cat」 files. The link of auto-installation program is having auto install shield tool which can let you install driver more easily by few clicks. Basically, the drivers of “auto-installation program” and “Win XP64 and WinZP driver” are the same.
If you are the end-user and use Windows O/S series, we recommend for you to choose the link of “auto-installation program” to download.
A3:
The link of “WinXP64 and WinXP driver” is only having 「sys」,「inf」, and「cat」 files. The link of auto-installation program is having auto install shield tool which can let you install driver more easily by few clicks. Basically, the drivers of “auto-installation program” and “Win XP64 and WinZP driver” are the same.
If you are the end-user and use Windows O/S series, we recommend for you to choose the link of “auto-installation program” to download.
A4:
If your NIC is working, you may not need to update the latest driver.
A5:
Please contact with local computer store, you may buy the NIC card which was designed in Realtek Ethernet IC. Realtek is the IC design company, we don't sell the Ethernet card.
A5:
Please contact with local computer store, you may buy the NIC card which was designed in Realtek Ethernet IC. Realtek is the IC design company, we don't sell the Ethernet card.
A6: (1)&Log on to the computer by using administrator account
(2)Click [Start], Click [Setting], and then click [Control Panel]
(3)In control panel, double click[Network and Dial-up Connections]
(4)Right-click the local area connection that you want, and then click[Properties]. The [local area Network Connection Properties] dialog box opens.
(5)In the Components checks are used by this connection box, click[Internet Protocol TCP/IP], and then click [Properties].
(6)Continue with the steps in one of the following two sections.
A8:
Realtek doesn't support VISTA driver for these two devices. You may download WinXP driver to install it under VISTA
A9:
RTL8201, RTL8201BL, RTL8201CL, RTL8201CP, RTL8201N and RTL8211B(L) are all PHYceiver. That is a driverless hardware device. Software driver are relative to Network controller ( MAC ) which is integrated into chipset in such case mostly. Please contact your mother board maker or chipset manufacturer to obtain proper driver support.
A9:
RTL8201, RTL8201BL, RTL8201CL, RTL8201CP, RTL8201N and RTL8211B(L) are all PHYceiver. That is a driverless hardware device. Software driver are relative to Network controller ( MAC ) which is integrated into chipset in such case mostly. Please contact your mother board maker or chipset manufacturer to obtain proper driver support.
A10:
There is RTL8139/810x inbox driver under kernel 2.6.x, you don't need to install extra driver.
A11:
There is RTL8139/810x native driver under WinCE4.x/5.x builder, you don't need to install extra driver.
A11:
There is RTL8139/810x native driver under WinCE4.x/5.x builder, you don't need to install extra driver.
A12: After “make clean modules”, the error message is show as below. That mean you don’t load kernel source. Please install kernel source first.
rm -f *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags.tmp_veions
make -C /lib/modules/2.6.11.4-21.7-smp/build SUBDIRS=/root/r1000_v1.05/src/src modules
make[1]: Entering directory /usr/sec/linux2.6.11.4.4-21.7-obj/x86-64/smp
make[1]:**no rule to make target 'modules'.stop
make[1]: leaving directory /usr/sec/linux2.6.11.4.4-21.7-obj/x86-64/smp
make :**[modules]Error 2
A13: Realtek all communicate series products are meet RoHS compliant, or you can contact with
nicfae@realtek.com to confirm it.
A13: Realtek all communicate series products are meet RoHS compliant, or you can contact with
nicfae@realtek.com to confirm it.
A14: Realtek NIC product meets JEDEC std MSL level 3. If you need detail information about IC package, please kindly mail to
nicfae@realtek.com A15: Realtek NIC product follow J-std-020c standard. Please kindly mail to
nicfae@realtek.com, if you need more detail information.
A15: Realtek NIC product follow J-std-020c standard. Please kindly mail to
nicfae@realtek.com, if you need more detail information.